IMPERIUM: the intelligent lighting management system

PALAZZOLI IMPERIUM: LIGHTING LARGE AREAS WITH AN INTELLIGENT LIGHTING MANAGEMENT

To reduce energy consumption by more than 50%, Palazzoli provides IMPERIUM, the intelligent lighting management system.

Palazzoli's IMPERIUM is equipped with motion sensors, brightness sensors and control algorithms programmed according to time slots.

LIGHTING OF LARGE AREAS: DALI-WIRED IMPERIUM

DALI-wired Imperium is a lighting system for large areas, in which brightness and motion sensors interact with luminaires equipped with DALI drivers.

The sensors regulate the artificial lighting of an installation according to the presence of people and according to the contribution of artificial light.

LIGHTING OF LARGE AREAS: IMPERIUM WIRELESS

Imperium wireless is a solution for managing lighting installations in large areas without a wired BUS connection between luminaires.

The IMPERIUM Wireless system architecture is based on light fixtures equipped with an internal DALI driver, to which wireless nodes are added.

The ZQ LIGHT LINK app available for Android and Apple allows you to create groups of light fixtures and wireless sensors.

Through the app it is possible to configure the operating parameters of each group and remotely control the lighting systems.

LIGHTING LARGE AREAS: DALI SENSOR

The DALI sensor constantly measures the ambient brightness value and compares it with the value set in the presence detector.

If the natural light value is sufficient, artificial lights will not be switched on.

If the daylight value is lower than the set value, the sensor switches the light on and adjusts it to the set light level.

If the amount of daylight present is higher than the set Lux value and/or if no presence is detected after the set delay time, after 5min, the detector automatically switches the light off.